74th Conference on Glass Problems. Ceramic Engineering and by S. K. Sundaram

By S. K. Sundaram

Ceramic Engineering and technology complaints quantity 35, factor 1, 74th convention on Glass difficulties
S.K. Sundaram, Editor
In carrying on with the culture that dates again to 1934, this quantity is a set of 25 papers awarded on the 74th Glass difficulties convention, October 14–17, 2013 in Columbus, Ohio. those papers are crucial interpreting for all who have to remain abreast of the most recent learn within the glass production box. content material is grouped into the under 5 sections:

  • Batching and Forming
  • Glass Melting
  • Modeling, Sensing and Control
  • Refractories I
  • Refractories II
  • Show description

    Read Online or Download 74th Conference on Glass Problems. Ceramic Engineering and Science Proceedings, Volume 35, Issue 1 PDF

    Best engineering books

    Engineering Education and Management: Vol 2, Results of the 2011 International Conference on Engineering Education and Management (ICEEM2011)

    This is often the court cases of the chosen papers offered at 2011 overseas convention on Engineering schooling and administration (ICEEM2011) held in Guangzhou, China, in the course of November 18-20, 2011. ICEEM2011 is without doubt one of the most vital meetings within the box of Engineering schooling and administration and is co-organized by way of Guangzhou college, The collage of latest South Wales, Zhejiang college and Xi’an Jiaotong college.

    Additional resources for 74th Conference on Glass Problems. Ceramic Engineering and Science Proceedings, Volume 35, Issue 1

    Example text

    Regardless of what technique was used to concentrate the portion of the raw material that is under investigation, the next step of the analysis is to perform petrographic analysis of the grains by transmitted PLM. This can be done by transferring some of the grains onto a microscope slide, adding a few drops of refractive index liquid of known index, and sealing with a coverslip. SEM/EDX analysis can be performed on another portion of the assorted grains, or if in limited supply, after washing and drying of the grains previously analyzed by PLM.

    Com. com/go/permission. Limit of Liability/Disclaimer of Warranty: While the publisher and author have used their best efforts in preparing this book, they make no representations or warranties with respect to the accuracy or completeness of the contents of this book and specifically disclaim any implied warranties of merchantability or fitness for a particular purpose. No warranty may be created or extended by sales representatives or written sales materials. The advice and strategies contained herein may not be suitable for your situation.

    This can cause flame impingement on the burner block and result in damage to the burner block. On the other hand, when the mixing between fuel and oxygen occurs too slowly (weak swirl), the flame is not robust enough and there is the possibility of inadequate mixing of fuel and oxidizer, which can lead to soot formation on the burner injector. Figure 2: Scheme symbolizing the fuel (red color) and the oxygen (blue color) flows when the power changes; thanks to the swirl effect, the reaction between reactants takes place in the same area which leads to the same flame length The swirl effect helps to maintain the hot spot of the flame at the same location even when the burner power is varied within a wide range.

    Download PDF sample

    Rated 4.09 of 5 – based on 13 votes